The semi-automatic timing system uses manual finish buttons to record the result for each lane. The timing result as well as the places of the competitors are determined in real time and printed out immediately
The manual buttons are connected with a special cable MC8- SWIM. The start signal is given through the SPP loudspeaker. The competition results can be displayed on various scoreboards connected to the Timy3 WP.

Wireless, semi-automatic timing system where each lane is matched to a timing referee button with an individual radio channel. The wireless system can work in pools of up to 8 lanes. Several scoreboards can be connected to the Timy3 WP timer at the same time and after the swimmers finish, the information can be displayed very quickly on the scoreboard and protocols can be printed out.

The fully automatic timing system allows each swimmer to stop the time by touching the finish panel. In addition to the finish panel, this system allows up to 3 hand buttons per lane. Loudspeakers mounted on each lane transmit commands and the start signal. For high-level competitions, the automatic timing system can be retrofitted. In addition, with the new OPTIc3 photo finish, a complete duplicate video system is available.

The TM-SWIM system has been specially designed for use in the extreme conditions of swimming pools. TM-SWIM is the first swim timing system to be equipped with a USB port, allowing TM-SWIM to be connected directly to computers. It has a built-in audio amplifier, rechargeable battery, state-of-the-art electronics and a robust design from ALGE-TIMING. All time recording functions are performed and stored directly in the TM-SWIM. The computer is only needed to create the competition record in the system and is then only used to view and control TM-SWIM. TM-SWIM automatically monitors the progress of the competition by sending the results to the Swim Time program, whose user-friendly interface allows the user to follow the progress of the competition.

Characteristics of the ALGE-TIMING TM-SWIM timing system:

· computerized timing system;
· USB port;
· ease of operation;
· ability to control up to 16 lanes on both sides of the pool;
· visual and audio commands;
· the ability to connect 1 finishing panel, 3 manual time registration buttons and 1 false start sensor for each track (5 separate time registration channels for each track and side);
· built-in backup battery, 4 hours of operation (without a computer);

The system has been specifically designed for use in extreme swimming pool environments. It has a built-in audio amplifier, rechargeable battery, state-of-the-art electronics and rugged construction from ALGE-TIMING. All time recording functions are performed and stored directly in the TM-SWIM. The computer is only needed to create the competition record in the system and is then only used to view and control TM-SWIM.
TM-SWIM automatically monitors the progress of the competition by sending the results to the Swim Time program, whose user-friendly interface allows the user to follow the progress of the competition.

Swim Time program and TM-SWIM timing system

New technologies that make timing a pleasure.
- built-in speaker system;
- false start information on the screen;
- warning when there is a big difference between pressing a button and touching the finish panel;
- highly reliable and durable finish panels
; - recording statistics such as trigger times, breakaway times, etc.;
- FINA, SSCH, AAU, NCAA and LEN compliance.

ALGE-TIMING has developed a special timing program based on the Timy3 timer for swim training, allowing measurements to be taken on two lanes.

The following types of measurements are available

Single training:
Time when the swimmer creates the first pressure on the start bollard
Time when the swimmer leaves the start bollard first touch
Time from touch to release of the finish panel, etc.

Relay training:
Time when swimmer applies first pressure to the starting board
Time when swimmer leaves the starting board first touch

Time when swimmer applies first pressure to the starting board
Time when swimmer leaves the starting board etc.

Digital
LED scoreboards LED information boards with seven-segment indicators are ideal for use both indoors and outdoors.

ALGE-TIMING also offers first-class LED full-color and graphic
scoreboards (screens) for use in all sports venues. They are suitable for use in both indoor and outdoor pool environments.

LED scoreboard with seven-segment modules
The D-SWxxx series scoreboards have been specifically designed for indoor and outdoor use. They are controlled by the TM-SWIM timing system, Timy3 timer or DCKN remote control. All LED signage from ALGE-TIMING uses bright LEDs with a lifetime of over 100,000 hours.

We can offer information boards with digit heights from 57 mm to 600 mm.
Standard height of the digits of the scoreboard for indoor use: 57, 100, 150 and 250mm
Standard height of scoreboard digits for outdoor use: 80, 150, 250, 450 and 600 mm D-SWxx-8- (IO)

This one-line information board allows you to display the swimmer's place, lane and time. The swimmer's result can be displayed alternately. In combination with a separately available water polo remote control, it can display game time and score (0 to 9). D-xxxSWxx-7 (8) - (IO). It is possible to display the time for each lane. These scoreboards are available in various configurations for individual selection.
In combination with a separately available water polo console, game time, score and penalty time can be displayed on the scoreboard. D-SWxx-5- (IO) This optional scoreboard allows spectators to see a complete picture of the competition and displays the discipline number and heat number. This option can be integrated into any of our scoreboards.